Andy Pugh wrote: > As for speed signal noise, my speed signal is fairly random, (it is a > home-made encoder ring with slot-sensors) but using the right PID > values seems to filter that effect adequately. > Well, I guess I will have to try this out. > I have just thought of another way of doing the same thing that might > work, you could potentially make a "gasket with mounting tabs" with > the sensors on the (folded down) tabs and the remainder clamped > between the castings over the full mating surface. I guess that would > depend on how critical the casting separation is, ie whether there is > a bearing in the top cover or something else that "cares". The direct drive clutch is between these two parts, so spreading them apart very much would possibly make the clutch not engage at all.
Jon ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
