Oh, I thought HOME_IS_SHARED meant the home was shared with another axis. I'll give that a try.
Neil On Tue, May 4, 2010 at 12:03 PM, Stephen Wille Padnos <spad...@sover.net> wrote: > Neil Baylis wrote: >> [snip] >> Here's the Homing section of my .ini file: >> >> HOME_SEARCH_VEL = -1.0 >> HOME_LATCH_VEL = 0.1 >> HOME_USE_INDEX = NO >> HOME_IGNORE_LIMITS = NO >> HOME_IS_SHARED = NO >> HOME_OFFSET = 0.0 >> HOME = 0.0 >> > I think you need HOME_IS_SHARED = 1 > > That says that home is shared with a limit. > > - Steve > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- http://www.pixpopuli.com ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users