>
>
>
>> As run from selected line just do RUN FROM SELECTED LINE!
> > >> and if machine is metric and in 1'st line you have G20 then part come
> > >> out realy big.
> > >> and if somwhere within program some variables are set after Run from
> > >> selected line they have big chance to be wrong.
> > >>
> > >
> > >I thought it re-ran the whole code. My mistake. I probably got confused
> > >by Mach which does re-run the whole code.
>
>
It would be great if EMC could scan the code and apply the modal codes when
you do a "run from here". I have seen it reported as a bug in the archives.
The developers stated that *not* scanning the program for modal codes was a
*feature*. That is a nice way to say we don't want to do it!

You could never make the control idiot proof. The operator needs to know not
to restart in the middle of cutting a T-slot in incremental mode or
something impossible. But I see no reason why the control could not select
the right tool, start the spindle/coolant, select the offsets and plane, and
then move to the correct location and get started.
------------------------------------------------------------------------------

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to