This issue sounds like you have the SCALE settings for the X axis set wrong. Check your INI files for the X and Y axes for the scale values. If they are the same, then the problem lies elsewhere. If not, then adjust the value 10X and remeasure.
> > >> 1) distance of movement on X axis is approximately 10 times less then > >> on Y axis in situation, when i order to move the same distance on both > >> axis. I simply enter G0 X50Y50 in MDI mode and then measure the actual > >> movement (I have marked the starting point on the paper which is > >> positioned on the table). I just called the technicians, they > >> confirmed that motors and all the other mechanical parts (gearboxes > >> etc) are the same for both - X and Y axis. > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
