Hi Aram, http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Hooking_Up_A_MPG_Pendant and some http://www.chembal.com/cnc/mpg2-emc2-integration
made it really simple for me, took an hour including soldering? -Michael Am 27.11.2010 um 05:25 schrieb a...@conceptmachinery.com: > Hi > I remember when I load fists Ubuntu 5.1 , and video card did not work on > my Compaq SR1830NX desk top. Ray Henry reset video driver to VESA etc. > It was in 2007. > With 2008 --8.04 , EMC2 2.2.5 there is no such problem. > Each new release solving problems. > Will this release make easy to wire and use pedant? > Preset some files from OEM (EMC2) perspectives. > Some work that done on pendent characterized as “quick and ….” “it is > working”. > Pendant has standard elements such as: > 1. jog wheel A+ A- B+ B- > 2. increment switching 0.1; 0.01; 0.001 > 3. axis switching X; Y; Z; A; etc > 4. enabling pedant ON, OFF > > and allocate special pins to wire pendant can be good idea. > I can say my 3 axis mill that I build very robust system and working > perfect. I used all preset pins – home- limit switches for all axis that > all was there already. I did not add any code. Can same be done with > pendant by allocating pins to wire in pendant? > > Thanks > Aram > > > > > > > >> I'm pleased to announce the next bugfix release of emc, version 2.4.6. >> This mainly fixes the "D510MO bug", but also has a number of other >> bugfixes. >> >> The new packages are available in the package repositories. If you >> installed 2.4.0 or later, this will be presented >> as an upgrade. If you have 2.3.5 or earlier, it will not automatically >> be installed as an upgrade. For more information and >> installation/upgrade instructions, please see >> http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UpdatingTo2.4 >> >> Git users can get this release by checking out the v2.4.6 tag, or follow >> bugfixes on the v2.4_branch. Source tarballs are available from the >> package repository, http://linuxcnc.org/hardy/dists/hardy/emc2.4/source >> >> List of all changes in this release: >> * documentation: various improvements >> >> * estop_latch: make watchdog behavior match documentation. >> >> * hostmot2: make gpio pins behave when the value of the pin as an >> integer was >> not 0 or 1 >> >> * iocontrol: fix current tool information after reloading table >> >> * near: fix for negative inputs >> >> * pico/7i43/pluto: if the kernel does not report a base_hi address, make >> an educated guess (fixes the D510MO bug) >> * pico/7i43/pluto: show "linux parport does not support mode" as a >> warning, >> not an error >> >> * pncconf: fix spinbox limits on metric configurations >> * pncconf: fix jogging buttons on lathe configs >> * pncconf: add touchy gui choice >> * pncconf: fix spindle-at-speed code >> * pncconf: fix launchers on ubuntu 10.04 >> * pncconf: fix firmware directory names for 7i43, 5i22 >> >> * sample configs: add another smithy sample configuration >> >> * stepconf: fix launchers on ubuntu 10.04 >> >> * touchy: fix display of 3-digit active gcodes >> >> Jeff >> >> ------------------------------------------------------------------------------ >> Increase Visibility of Your 3D Game App & Earn a Chance To Win $500! >> Tap into the largest installed PC base & get more eyes on your game by >> optimizing for Intel(R) Graphics Technology. Get started today with the >> Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs. >> http://p.sf.net/sfu/intelisp-dev2dev >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > > ------------------------------------------------------------------------------ > Increase Visibility of Your 3D Game App & Earn a Chance To Win $500! > Tap into the largest installed PC base & get more eyes on your game by > optimizing for Intel(R) Graphics Technology. Get started today with the > Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs. > http://p.sf.net/sfu/intelisp-dev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Increase Visibility of Your 3D Game App & Earn a Chance To Win $500! Tap into the largest installed PC base & get more eyes on your game by optimizing for Intel(R) Graphics Technology. Get started today with the Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs. http://p.sf.net/sfu/intelisp-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
