Mark Wendt (Contractor) wrote: > My question is, can comp_file be used to map out those inconsistent > heights in software, so that I don't have to file and scrape anymore? ;-) > > You probably need to talk to Stuart Stevenson, who built a fairly complex component to correct all the errors in his 5-axis Cincinnatti mill. It is possible that his component could be used in your application just by zeroing out all the un-needed corrections, and supplying your own mapping table. Otherwise, it could just be a guide as to how to build a one-axis correction table to compensate a different axis.
One other thought is that you might be able to rig a die grinder or Dremel to your axis and make it plane down your table until it is parallel to the axis travel. Jon ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
