On Sunday, January 30, 2011 06:47:36 pm Mark Wendt (Contractor) did opine: > On 1/30/2011 10:29 AM, gene heskett wrote: > > On 1/29/2011 5:46 PM, gene heskett wrote: > >> I forgot to mention, the hold-down bed, as is much of the machine > >> itself, is aluminum. I was able to tilt the saw spindle to fit a > >> sanding drum and work at shaving the top of the hold-down bed down, > >> but the problem was, at that angle, I don't have any way to ensure > >> the spindle housing gets locked into the mount solidly enough to do > >> the shaving with any accuracy. It's what I did to get to the point > >> where I started draw filing and scraping. The other issue is > >> there's not really any way to mount an external tool on the cutting > >> head to fly cut, or even mill. The flattening of the hold-down bed > >> was one of those issues during the design phase that sorta slipped > >> my mind. > >> > >> So, it looks like it's further development of my Popeye fore arms... > >> ;-) > > > > Be sure and eat your spinach now, y'all hear? > > ;-) > > I'll be off to the grocery store later this afternoon and plan on buying > at least of case. ;-) > > Mark Good luck finding it in the Popeye enhanced version. Thats where you just give the can a squeeze and it self opens. ;-)
-- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) <http://tinyurl.com/ddg5bz> PUNK ROCK!! DISCO DUCK!! BIRTH CONTROL!! ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
