On Thu, 2011-02-03 at 23:23 -0500, Don Stanley wrote: > Hi Jon; > Answers below. > > On Thu, Feb 3, 2011 at 9:32 PM, Jon Elson <[email protected]> wrote: > > > Don Stanley wrote: > > > Hi All; > > > I am attempting to configure EMC2 10.04.06 to control RPM > > > on a 60 HZ AC generator.
Don, are you going to try doing voltage regulation too? I seem to recall there are some non-obvious situations that the expensive regulators guard against. Something to do with sudden changes in load causing burnt out rotors or race conditions. Oh and for my encoder velocity suggestion, the PID error could be feed to stepgen's velocity mode. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ The modern datacenter depends on network connectivity to access resources and provide services. The best practices for maximizing a physical server's connectivity to a physical network are well understood - see how these rules translate into the virtual world? http://p.sf.net/sfu/oracle-sfdevnlfb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
