On 08/25/2011 05:31 AM, Viesturs Lācis wrote: > 2011/8/25 Mark Wendt<[email protected]>: > >> On 08/25/2011 04:59 AM, Viesturs Lācis wrote: >> >>> Hello, gentlemen! >>> >>> I am having difficulties with getting Mesa 7i43 card working on D510 board. >>> >>> I have set parport to EPP in BIOS. I have checked it at least 4 times. >>> But dmesg shows: >>> [ 8.962720] parport0: PC-style at 0x378, irq 7 [PCSPP] >>> >>> I reinstalled Lucid this morning, but that did not bring any improvement. >>> >>> Does anyone have any idea, what else can I do? >>> Update BIOS? >>> >>> Viesturs >>> >>> >> Viesturs, >> >> Are you sure 0x378 is the address for the 7i43 and not some onboard >> parallel port that the motherboard thinks is there? >> > My apologies, but since 7i43 is attached to onboard parallel port, I > do not understand Your question. > > Viesturs > > Viesturs,
Sorry, my mistake. I was thinking the 7i43 was a PCI board. Didn't realize it had to be plugged into the parallel port. Mark ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
