On Thu, 2011-08-25 at 08:51 -0400, Kent A. Reed wrote: ...snip > > But dmesg shows: > > [ 8.962720] parport0: PC-style at 0x378, irq 7 [PCSPP]
"PCSPP" above seems to indicate that the port is not in EPP mode. Would setting the proper bit in a register fix this? I wrote a short utility, showport.c, to help me understand the parallel port, but seems to come in handy for setting bits too. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Startech -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
