I think when they say 'open' they mean open your wallets! Package starts at $7000!!
----- Original Message ----- From: "Eric H. Johnson" <ejohn...@camalytics.com> To: "'Enhanced Machine Controller (EMC)'" <emc-users@lists.sourceforge.net> Sent: Monday, August 29, 2011 3:19 PM Subject: Re: [Emc-users] OpenCNC paper > Anders, > > Will Shackleford went on to work for MDSI. He was there circa 2005 when I > visited for training, but at that point I had not realized who he was. > OpenCNC was the product that indirectly introduced me to EMC and the > reason > I ported the VTI driver from EMC to EMC2, as that was the board we were > using with OpenCNC. I started out using OpenCNC while playing with EMC as > a > side project. Needless to say, in the end we went with EMC and dropped > both > OpenCNC and the VTI board in the process. > > There really is not much commonality that I could see between the two > products. I still have a copy (original CDs) of OpenCNC V6.5. > > Regards, > Eric > > > While browsing the interwebs I came across this new paper "Performance > analysis of cross-coupled controllers for CNC machines based upon > precise real-time contour error measurement" > http://www.sciencedirect.com/science/article/pii/S0890695511001659 > or > http://dx.doi.org/10.1016/j.ijmachtools.2011.08.015 > > It uses MDSI:s OpenCNC controller. Does anyone know if there is any > common history of the EMC-project and MDSI's "open architecture" > OpenCNC ? > > Drop me an email if you are interested in the PDF but are not sitting > on a campus with access :) > > > > ------------------------------------------------------------------------------ > EMC VNX: the world's simplest storage, starting under $10K > The only unified storage solution that offers unified management > Up to 160% more powerful than alternatives and 25% more efficient. > Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.449 / Virus Database: 271.1.1/3864 - Release Date: 08/28/11 18:34:00 ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
