On Wed, 2011-09-14 at 11:09 -0700, doug metzler wrote: > Yes, I do have the C22 interface board. > > Do any of you have this pendant running and if so would you be willing > to send me your config files and the type of parallel card you're > using?
The last three links here: http://cnc4pc.com/Tech_Docs/Guide_for_setting_up_a_Pendant_or_Panel.htm cover the CNC4PC pendant's set up with EMC2. I'm thinking that the wiki pendant page could stand some filling out. I would tend to start with your known good non pendant configuration, then add parts of the pendant configuration with a test to see if the addition is working. For instance the MPG rate multiplexer can be a real bugger to understand but bypassing it can allow one to test to see if the MPG signals are making it into EMC2. The mux could be added after the MPG has been verified. The wiki page might be better if it recorded the same process. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA Learn about the latest advances in developing for the BlackBerry® mobile platform with sessions, labs & more. See new tools and technologies. Register for BlackBerry® DevCon today! http://p.sf.net/sfu/rim-devcon-copy1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users