Mark Wendt wrote: >> >> > I have one of those CNC4PC/Keling pendants. The e-stop works fine, but > I've never been able to get the enable button to work. > That's because the white button is wired from the factory as Normally CLOSED! So, when you push it, it disconnects the wiper from the axis selector knob. BUT, the button is a SPDT switch, so you can move the wire inside to make it a NO contact. Otherwise, you could rig a memory element to the HAL code so that it remembers the last axis it saw, but only activates the jog function when there is no axis contact selected. Then it would work with the stock wiring of the pendant. I chose to move the wire inside.
Jon ------------------------------------------------------------------------------ Doing More with Less: The Next Generation Virtual Desktop What are the key obstacles that have prevented many mid-market businesses from deploying virtual desktops? How do next-generation virtual desktops provide companies an easier-to-deploy, easier-to-manage and more affordable virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
