On 11/06/2011 12:37 PM, Viesturs Lācis wrote: > 2011/11/6 Slavko Kocjancic<[email protected]>: > >> I agree that filtering is good thing to do. But in this case (running >> near 1 hour without problem) the EMI isnt the source of trouble. >> > Thanks, guys, for suggestions! > I will try to figure out, how to test, if PC is ok and if the > spindles/VFD does mess the thing for the starting point, because I > also think that the tendency for machine to work correctly some time > after turning it makes the whole situation frustrating. > > Yes, finding the cause of intermittent problems can be very difficult. It may be that only with the machine in a particular position are the wires in such a shape that the interference disrupts the operation. It could be cables or connectors that are breaking contact in certain positions, it could be electrical interference, or something completely different.
Jon ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
