I have my tool changer set up in hal and classicladder. Go to http://gnipsel.com/shop/hardinge/hardinge.xhtml to see my configs.
John On 2/25/2012 9:49 AM, Lee Osborne wrote: > Hi > > Can anyone help with making a user m code for a digital output on a > mesa 5i20, 7i33 and 7i37 set up. I have managed to get all the servos > working and coolant but I have extra digital outputs connected to > solenoids for a toolchanger. I have tried making an M101 file but I > cant get it to do anything. There are no error messages either so I can > only assume it is reading it but it is not changing the state of the > pin. The contents of the M101 file is below which came straight from > the manual but I have changed it from a parallel port pin to a mesa I/o > Pin. Any ideas would be great as I have tried several things and am > stuck on this one. > > #!/bin/sh > halcmd setp hm2_5i20.0.gpio.0042.out True > exit 0 > > Thanks > > Lee > > ------------------------------------------------------------------------------ > Virtualization& Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
