On Apr 11, 2012, at 11:21 PM, Andy Pugh wrote: > On 11 Apr 2012, at 21:49, Jeshua Lacock <jes...@3dtopo.com> wrote: > >> Is there any way to restart from line 20,000? > > Maybe. You will need to jog to somewhere where a move as specified in that > line will be safe, then set feed rate, start the spindle etc in MDI, then > left click the g-code line in the G-code window to select it, then > right-click and choose "run from here" (I can't recall the exact phrase)
Thanks Andy. So for instance, line 20001 is: X2.1429 Y17.5769 Z-0.6793 So, assuming it was homed properly, I would start the spindle (I currently have to manually switch it on), set the feed rate, then issue an MDI: G00 X2.1429 Y17.5769 Z-0.6793 Click on line 20001, and click "Run from selected line"? How do I set the feed rate? > It isn't 100% reliable, depending on the structure of the G-code. I think it is basically a flat g-code file. I think even though I don't know the exact position it was homed to I will give it a shot. I have something to gain but nothing to lose at this point. Best, Jeshua Lacock Founder/Engineer 3DTOPO Incorporated <http://3DTOPO.com> Phone: 208.462.4171 ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
