On Apr 12, 2012, at 12:04 AM, Andy Pugh wrote: > On 11 Apr 2012, at 22:31, Jeshua Lacock <jes...@3dtopo.com> wrote: > >> G00 X2.1429 Y17.5769 Z-0.6793 >> >> Click on line 20001, and click "Run from selected line"? > > No, because that would leave the machine in G0 mode and you almost certainly > want G1. > Possibly you want to G0 to the position in 19999 then G1Fnn to the position > in 20000, where nn is the feed rate specified further up in the file.
Thanks Andy, I think that would have worked perfectly had I marked my home on the piece. It was off a little, so I stopped it, moved it a tad, re-homed it and I think it is close enough now. I think I should be able to fix the mistakes with a little putty and sanding. Best, Jeshua Lacock Founder/Engineer 3DTOPO Incorporated <http://3DTOPO.com> Phone: 208.462.4171 ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
