On Monday, April 16, 2012 07:05:21 AM andy pugh did opine: > 2012/4/16 gene heskett <ghesk...@wdtv.com>: > >> http://img35.imageshack.us/img35/3557/screenshot1kq.png(pins 12 and > >> 13 supposed to be A and B) > > I think you might need to move the encoder more slowly, as you only > have a 1mS sample rate available. > It almost looks like there is no actual quadrature offset in the > channels. > > I think counter-mode only counts up, and only looks at one channel. > > > Looks like it is but those slow rise & fall times > > That is a Halscope trace, so digital. The apparent slew-rate is just > how Halscope joins the dots.
My halscope tracing looks similar to the real scope, shows none of that slew rate limited effect, only the expected sample timing jitter. When I can run the spindle again, I will do a screen capture and post it alongside the 100mhz version. Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> Never get into fights with ugly people because they have nothing to lose. ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
