On 4/22/2012 3:48 PM, andy pugh wrote: > On 22 April 2012 16:07, Michael Haberler<mai...@mah.priv.at> wrote: >> gents, you are busily inventing path queueing mechanism number 3. The >> existing ones are: CRC offset curve aka queued_canon, and NCD aka >> chained_points. > I think CRC is "Cutter Radius Compensation" and NCD os "Naive CAM detection"? > I suspect that very few people know enough about how LinuxCNC works > now to realise that is what it being implied. However, my > understanding was that we were talking about ways to "fix" the > existing behaviour. > > Thanks, Andy. I'm sure you're right. That's the trouble with 3-letter acronyms. Too many chances for a clash. Once my brain had latched onto the wrong interpretation, I was doomed.
Regards, Kent ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
