On 9 May 2012 17:51, dave <dengv...@charter.net> wrote: > I've seen P values as low as 15 and as high as 600 & FF1 values from 18 > (ugh) down to -0.01.
The parameters are not unitless, so will vary even on identical hardware between mm and inch machines, and depending on whether the pwmgen is calibrated in volts, % or 0-1. (and also, I think, depending on the servo thread rate, though I would have to look inside PID to see if that is considered.) -- atp The idea that there is no such thing as objective truth is, quite simply, wrong. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users