On May 23, 2012, at 2:01 AM, Claude Froidevaux wrote: > 1) make a hal check, that disable drive if more than 5-10 consecutive > sample period with maximum drive output without any encoder change > > 2) if you use a hal encoder (brushless motor), use it as second encoder, > and cut motor power if more than about 20° of error between both > > theses are not perfect solution, but are quite simple.
Hi Claude, Sounds great, thanks! Is there anyway you can show me a hal sample or point me in the right direction? I don't have much hal experience at all. Thanks again, Jeshua Lacock Founder/Engineer 3DTOPO Incorporated <http://3DTOPO.com> Phone: 208.462.4171 ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users