On Sat, Jun 9, 2012 at 2:55 PM, Jon Elson <[email protected]> wrote:
> Igor Chudov wrote: > > > > > > How does it work if one needs to punch a hole at the far end of the > table? > > Does the head extend/telescope forward? > > > > > The classic turret punch has two synchronized wheels that carry the > punches and dies, > respectively. They are mounted on a frame with a deep throat. There is > a table > that supports the workpiece. A lightweight set of axis drives hold the > edges of the > workpiece and position it. Often a clamp holds the work in place while > the punch > is cycled. Many of these machines can bend and fold, as well as punch, so > vent louvers and flanges can be made, too. This machine looks too old, but > newer ones can also rotate the punch-die sets to make the machine even more > flexible. > > There is no "head", only the workpiece moves. > > Thanks! Does it punch hydraulically? i > Jon > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
