On 16 July 2012 15:21, Gene Heskett <ghesk...@wdtv.com> wrote: > Chuckle, I'll bet its not cheap too. But 1/4" isn't quite big enough for > this. But by the time I can get it, I can probably make it,
I have, in the past, made a similar thing (actually a screw for a 4-jaw chuck) by hammering a hex bit into an undersize-drilled hole, then beating the whole thing with a hammer on an anvil until the hole was hexagonal and the key would come out. Circularity was restored on the lathe later. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users