On Thu, 25 Oct 2012, Gene Heskett wrote: >I'd agree, but those of us using the D525MW need a 5i25 that will fit that >teeny little slot on that board. It has crossed my mind to do that at >least once in the last year, but that is the show stopper. Its something >that I would need to get to a RELIABLE 20 ipm on the z drive of my lathe. >I think I can get to about 35ipm IF I had enough psu to hold the voltage up >while the driver was set wide open (4.2 amps, a bit under the motors needs >for full jerk wired parallel) & the 8 wire motor was wired parallel. My x >motor is wired that way now, but needs more psu and psu cooling to do that >to Z. > >Cheers, Gene >-- >"There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." >2B-Ed Howdershelt (Author) >My web page: <http://coyoteden.dyndns-free.com:85/gene> is up! >One good turn deserves another. > -- Gaius Petronius
The 5i25 works fine in a D525MW... Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
