On Thursday 25 October 2012 14:54:50 Peter C. Wallace did opine: > On Thu, 25 Oct 2012, Gene Heskett wrote: > >I'd agree, but those of us using the D525MW need a 5i25 that will fit > >that teeny little slot on that board. It has crossed my mind to do > >that at least once in the last year, but that is the show stopper. > >Its something that I would need to get to a RELIABLE 20 ipm on the z > >drive of my lathe. I think I can get to about 35ipm IF I had enough > >psu to hold the voltage up while the driver was set wide open (4.2 > >amps, a bit under the motors needs for full jerk wired parallel) & the > >8 wire motor was wired parallel. My x motor is wired that way now, > >but needs more psu and psu cooling to do that to Z. > > > >Cheers, Gene > > The 5i25 works fine in a D525MW... > > Peter Wallace > Mesa Electronics
I was under the impression it was straight pci, Peter. And my boards IIRC have a teeny little pci-e slot. But I'll sure look again. Wet ram, at my age, isn't that dependable. :) > > ------------------------------------------------------------------------ > ------ Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_sfd2d_oct > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> is up! #if _FP_W_TYPE_SIZE < 64 #error "Only stud muffins allowed, schmuck." #endif -- linux/arch/sparc64/quad.c ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
