you just need to tighten them correctly. Has anyone actually looked up the torque tightening specs on collets? I think you would be surprised.... we have collets into the 1.5 to 2 inch range. I don't ever remember any pulling out.
John Thornton <[email protected]> wrote: >I use collets up to 3/4" with heavy cuts and huge fly cutters with no >problem. Collets are for milling too. > >John > >On 10/30/2012 12:35 PM, jeremy youngs wrote: >> be wary of milling with a collet, any serious cuts will tend to pull >> the endmill out ouf the collet. my position is i dont put an endmill >> larger than 3/8 in a collet they are for drills and reamers. otherwise >> a very good solution > > >------------------------------------------------------------------------------ >Everyone hates slow websites. So do we. >Make your web apps faster with AppDynamics >Download AppDynamics Lite for free today: >http://p.sf.net/sfu/appdyn_sfd2d_oct >_______________________________________________ >Emc-users mailing list >[email protected] >https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
