I am building with 2.6.0 ~pre. Something isn't working here, comp isn't found even after dev install. Is 2.6 incompatible with the probekins kinematics source?
On Tue, Nov 6, 2012 at 4:04 PM, andy pugh <bodge...@gmail.com> wrote: > On 6 November 2012 19:42, Erik Friesen <e...@aercon.net> wrote: > > I see the probekins tar.gz includes everything. I have my customized > > version of linuxcnc running, don't feel like using something else. Is it > > just a matter of dragging some of the files into my src and building? > > It might actually be easier than that. > You can often install a kinematics file using comp. > sudo comp --install probekins.c > > You might need the linuxcnc-dev package though, and if the kins file > has more than the usual includes, then you might need to do a complete > from-source build. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > LogMeIn Central: Instant, anywhere, Remote PC access and management. > Stay in control, update software, and manage PCs from one command center > Diagnose problems and improve visibility into emerging IT issues > Automate, monitor and manage. Do more in less time with Central > http://p.sf.net/sfu/logmein12331_d2d > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
