I pulled the source I am using about 9 months ago. I then modified it to allow saving more registers in the 4000+ range to allow the 3d preview to work with some custom gcode multiplier code. I also am using gladevcp. I think these depend on 2.6? or is it 2.5? It looks like probekins is 2.5 based. The problem is that I don't feel like spending a week digging down here, we'll see.
If there is no stlvis, there isn't going to be stlcor either? I feel like perhaps this is too undocumented for me to proceed with and maintain sanity. I lack the perceptive overview of this whole thing that I need. I am trying the PyCam, it loaded an stl. Then I created text, the stl disappeared. So I reloaded the stl, then the text is gone. I must be missing some basics. I do a bit of programming in C and C#, but this linux environment is frustrating to me, I suppose in part because there is no visual studio/mplabX to hold my hand, and keep it together. It seems so fragmented. On Wed, Nov 7, 2012 at 5:11 AM, andy pugh <bodge...@gmail.com> wrote: > On 7 November 2012 03:00, Erik Friesen <e...@aercon.net> wrote: > > Even after building the dev install, I don't find any stlvis script. > > I am not sure you need it. (but see the "Dependencies" section of that > Wiki page) > > It should just be a case of specifying probekins in the HAL, then > loading an STL file using the stlcor pythion script, and setting the > enable pin. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > LogMeIn Central: Instant, anywhere, Remote PC access and management. > Stay in control, update software, and manage PCs from one command center > Diagnose problems and improve visibility into emerging IT issues > Automate, monitor and manage. Do more in less time with Central > http://p.sf.net/sfu/logmein12331_d2d > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users