I mentioned the Teco servos. I've had really good luck with them in severe service running a packaging machine for 2 1/2 years now. They are running the machine beyond the original design speed...by quite a bit. But anything to get more bottles per hour out of the machine as that results in more $ per hour profit. Motion is provided by LinuxCNC.. :-)
Dave On 12/18/2012 6:54 PM, andy pugh wrote: > On 18 December 2012 23:43, Pete Matos<[email protected]> wrote: > >> Andy, >> What makes you say that exactly? Not that I am in disagreement really >> just curious. The Teco motors are very highly regarded by several I have >> spoken to >> > I hadn't even noticed that the Teco motors were part of this discussion. > > In practice I built my machine using a set of 3 Lenze motors I found > on eBay (at £50 the set). > > ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
