On 13 February 2013 17:31, Pete Matos <petefro...@gmail.com> wrote: > Not being too familiar with LinuxCNC does it have a HOME ALL > button where the actuation is followed by a slow homing of the Z axis, then > the X and then the Y etc... Does it allow for tripping the home switch and > then back off so one could maybe wire the home switches in series to the > mesa card only using one pin input? Or does it get more involved needing > all three home switches on different pins to allow the machine to home > properly?
Yes :-) As in, any and all of the above are possible. Personally I prefer a home switch for each axis, as then they don't have to wait for each other. (So you can home Z out of the way, then X and Y can home simultaneously) -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
