I use a PIII 700MHz with 1G ram for my 3 axis gluing machine, run smoothly the 3 stepper axes trough // port, and a bunch of ladder/sequential logic to control the glue nozzle.
Powerfull enough to play streaming music from internet while running the machine :) Le 01/05/2013 00:49, Gregg Eshelman a écrit : > Picked up a Dell Dimension L100R for free. Has parallel and serial ports, 1 > Ghz Socket 370 PIII with 512K cache (better than the 256K version) and will > have 512 meg PC133 once I find another 256 meg stick it likes. I have a > couple it sees as only 32 meg. (512 is max for this model.) > > I put an 80 gig hard drive in, have a CD-RW to replace the CD-ROM and need to > find a PCI video card instead of using the built in video that cuts out a > hunk of main RAM. > > This is a tiny little box, couldn't get much smaller without squeezing it > sideways and putting the optical drive in on edge. > > For the big plasma table I have a mpc ClientPro 365. Much more muscle to it > so it'll be able to handle XP + Mach3 and run the CAD and other software. All > the little Dell will be doing is running LinuxCNC on the torch arm. > > Going to try and get Ned to go on a shopping trip to get components for that > when he gets back from Utah. Found a surplus shop that has 4040 T-slot > extrusion for $2.49 a foot, plus various sizes of cable carrier and plenty of > other good stuff. I want to get that torch going first to cut some pieces for > the big table's gantry. > > ------------------------------------------------------------------------------ > Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET > Get 100% visibility into your production application - at no cost. > Code-level diagnostics for performance bottlenecks with <2% overhead > Download for free and get started troubleshooting in minutes. > http://p.sf.net/sfu/appdyn_d2d_ap1 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users