On 1 June 2013 03:52, propcoder <[email protected]> wrote: > Thank you, I will try what you wrote, but BLDC pattern is not used in q > or qi modes. System just tells that there is no such pin / parameter as > "pattern".
If you have hall sensors, then use them. There is absolutely no reason not to. "qhi" is probably the optimum mode in your situation. That will commutate on the Hall sensors until it sees the index, then switch to sinusoidal commutation when it sees the index. You should be able to adjust the bldc.N.encoder-offset parameter to make your motor symmetrical. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite It's a free troubleshooting tool designed for production Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
