Just trying to run LinuxCNC to have a look at it and it won't even run. I also
tried the latency test and nothing at all happens, *nothing*, not even an error
message. Just got done with a fresh install off the 2.5 disk then updated to
2.5.2. I first tried one of the simulation setups, then tried gantry-hs. Then I
tried the wizard setup and kept clicking forward until it was done. I just want
to have a look around to get a feel for the program.
I get this same fail to run every time.
2.5 did this same thing, I was hoping 2.5.2 would fix whatever is wrong.
The PC is a Dell Dimension L1000R 1.0 Ghz Pentium III with 512 meg RAM and an
80 gig hard drive.
http://gdgt.com/dell/dimension/l1000r/specs/
Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/realtime-2.6.32-122-rtai/modules/linuxcnc
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/share/linuxcnc/tcl/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.5
LINUXCNC - 2.5.2
Machine configuration directory is '/home/ned/linuxcnc/configs/my-mill'
Machine configuration file is 'my-mill.ini'
INIFILE=/home/ned/linuxcnc/configs/my-mill/my-mill.ini
PARAMETER_FILE=linuxcnc.var
TASK=milltask
HALUI=
DISPLAY=axis
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Realtime system did not load
Shutting down and cleaning up LinuxCNC...
Killing task linuxcncsvr, PID=2798
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments
Cleanup done
Debug file information:
Can not find -sec MOT -var MOT -num 1
Can not find -sec IO -var IO -num 1
Can not find -sec LINUXCNC -var NML_FILE -num 1
Can not find -sec EMC -var NML_FILE -num 1
insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1
Operation not permitted
2798
PID TTY STAT TIME COMMAND
Stopping realtime threads
RTAPI: ERROR: could not open shared memory (errno=2)
/usr/bin/linuxcnc: line 428: 2836 Segmentation fault $HALCMD stop
Unloading hal components
RTAPI: ERROR: could not open shared memory (errno=2)
/usr/bin/linuxcnc: line 428: 2837 Segmentation fault $HALCMD unload all
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
ERROR: Module hal_lib does not exist in /proc/modules
ERROR: Module rtapi does not exist in /proc/modules
ERROR: Module rtai_math does not exist in /proc/modules
ERROR: Module rtai_sem does not exist in /proc/modules
ERROR: Module rtai_fifos does not exist in /proc/modules
ERROR: Module rtai_sched does not exist in /proc/modules
ERROR: Module rtai_hal does not exist in /proc/modules
Kernel message information:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version
4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu
2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fec0000 (usable)
[ 0.000000] BIOS-e820: 000000001fec0000 - 000000001fef8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fef8000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1fec0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable)
==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001fec0000 (usable)
[ 0.000000] modified: 000000001fec0000 - 000000001fef8000 (ACPI data)
[ 0.000000] modified: 000000001fef8000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fec0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fec0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fec0000 @ 7000-c000
[ 0.000000] RAMDISK: 172c7000 - 17f4fdf8
[ 0.000000] ACPI: RSDP 000ff980 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 1fef0000 00028 (v01 DELL MUMMY 20010307 MSFT
00000097)
[ 0.000000] ACPI: FACP 1fef1000 00074 (v01 DELL MUMMY 20010307 MSFT
00000097)
[ 0.000000] ACPI: DSDT 1fee0000 027D8 (v01 DELL DIM_L 00000012 MSFT
0100000B)
[ 0.000000] ACPI: FACS 1fef8000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fec0000
[ 0.000000] low ram: 0 - 1fec0000
[ 0.000000] node 0 low ram: 00000000 - 1fec0000
[ 0.000000] node 0 bootmap 00008000 - 0000bfd8
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fec0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000
- 00008b0db8]
[ 0.000000] #4 [00172c7000 - 0017f4fdf8] RAMDISK ==> [00172c7000
- 0017f4fdf8]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #6 [00008b1000 - 00008b424c] BRK ==> [00008b1000
- 00008b424c]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000
- 0000008000]
[ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000
- 000000c000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fec0
[ 0.000000] HighMem 0x0001fec0 -> 0x0001fec0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fec0
[ 0.000000] On node 0 totalpages: 130651
[ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map
c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 990 pages used for memmap
[ 0.000000] Normal zone: 125666 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] Allocating PCI resources starting at 1ff00000 (gap:
1ff00000:dfc80000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @c1800000 s74936 r0 d23368 u4194304
[ 0.000000] pcpu-alloc: s74936 r0 d23368 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 129629
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai
root=UUID=a2563dcd-9efa-4ad0-b40d-47c84997bf57 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2615040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 494344k/523008k available (4539k kernel code, 27904k
reserved, 1928k data, 620k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe06c0000 - 0xff7fe000 ( 497 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfec0000 ( 510 MB)
[ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB)
[ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB)
[ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] I-pipe 2.6-03: pipeline enabled.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 996.668 MHz processor.
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer
frequency.. 1993.33 BogoMIPS (lpj=3986672)
[ 0.004067] Security Framework initialized
[ 0.004144] AppArmor: AppArmor initialized
[ 0.004167] Mount-cache hash table entries: 512
[ 0.004528] Initializing cgroup subsys ns
[ 0.004541] Initializing cgroup subsys cpuacct
[ 0.004553] Initializing cgroup subsys memory
[ 0.004580] Initializing cgroup subsys devices
[ 0.004589] Initializing cgroup subsys freezer
[ 0.004596] Initializing cgroup subsys net_cls
[ 0.004654] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.004663] CPU: L2 cache: 256K
[ 0.004676] mce: CPU supports 5 MCE banks
[ 0.004721] Performance Events:
[ 0.004728] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.004735] no hardware sampling interrupt available.
[ 0.004742] p6 PMU driver.
[ 0.004776] ... version: 0
[ 0.004782] ... bit width: 32
[ 0.004788] ... generic registers: 2
[ 0.004794] ... value mask: 00000000ffffffff
[ 0.004801] ... max period: 000000007fffffff
[ 0.004807] ... fixed-purpose events: 0
[ 0.004813] ... event mask: 0000000000000003
[ 0.004829] Checking 'hlt' instruction... OK.
[ 0.021459] SMP alternatives: switching to UP code
[ 0.031469] Freeing SMP alternatives: 31k freed
[ 0.031519] ACPI: Core revision 20090903
[ 0.039840] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.040024] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040045] ftrace: allocating 21003 entries in 42 pages
[ 0.055271] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.055287] weird, boot CPU (#0) not listed by the BIOS.
[ 0.055292] SMP motherboard not detected.
[ 0.055300] Local APIC not detected. Using dummy APIC emulation.
[ 0.055306] SMP disabled
[ 0.056140] Brought up 1 CPUs
[ 0.056156] Total of 1 processors activated (1993.33 BogoMIPS).
[ 0.057080] CPU0 attaching NULL sched-domain.
[ 0.057538] devtmpfs: initialized
[ 0.058544] regulator: core version 0.5
[ 0.058704] NET: Registered protocol family 16
[ 0.059045] EISA bus registered
[ 0.059069] ACPI: bus type pci registered
[ 0.059895] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1
[ 0.059903] PCI: Using configuration type 1 for base access
[ 0.062323] bio: create slab <bio-0> at 0
[ 0.063552] ACPI: EC: Look up EC in DSDT
[ 0.074588] ACPI: Interpreter enabled
[ 0.074597] ACPI: (supports S0 S5)
[ 0.074626] ACPI: Using PIC for interrupt routing
[ 0.081867] ACPI: Power Resource [URP1] (off)
[ 0.081942] ACPI: Power Resource [URP2] (off)
[ 0.082013] ACPI: Power Resource [FDDP] (off)
[ 0.082084] ACPI: Power Resource [LPTP] (off)
[ 0.082308] ACPI: No dock devices found.
[ 0.082869] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.083036] pci 0000:00:01.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.083049] pci 0000:00:01.0: reg 14 32bit mmio: [0xffa80000-0xffafffff]
[ 0.083233] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4
ACPI/GPIO/TCO
[ 0.083243] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
[ 0.083300] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.083374] pci 0000:00:1f.2: reg 20 io port: [0xef80-0xef9f]
[ 0.083446] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefaf]
[ 0.083544] pci 0000:01:08.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.083558] pci 0000:01:08.0: reg 14 io port: [0xd800-0xd8ff]
[ 0.083571] pci 0000:01:08.0: reg 18 32bit mmio: [0xff8f0000-0xff8fffff]
[ 0.083600] pci 0000:01:08.0: reg 30 32bit mmio pref: [0xff8c0000-0xff8dffff]
[ 0.083626] pci 0000:01:08.0: supports D1 D2
[ 0.083675] pci 0000:01:0b.0: reg 10 io port: [0xd400-0xd4ff]
[ 0.083689] pci 0000:01:0b.0: reg 14 32bit mmio: [0xff8efc00-0xff8effff]
[ 0.083722] pci 0000:01:0b.0: reg 30 32bit mmio pref: [0xff8a0000-0xff8bffff]
[ 0.083748] pci 0000:01:0b.0: supports D1 D2
[ 0.083755] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.083765] pci 0000:01:0b.0: PME# disabled
[ 0.083804] pci 0000:00:1e.0: transparent bridge
[ 0.083813] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.083823] pci 0000:00:1e.0: bridge 32bit mmio: [0xff800000-0xff8fffff]
[ 0.083835] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe6a00000-0xf6afffff]
[ 0.083851] pci_bus 0000:00: on NUMA node 0
[ 0.083863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.084082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.086552] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 0.086782] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 0.087007] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.087235] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 0.087528] vgaarb: device added:
PCI:0000:00:01.0,decodes=io+mem,owns=none,locks=none
[ 0.087548] vgaarb: device added:
PCI:0000:01:08.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.087557] vgaarb: loaded
[ 0.087944] SCSI subsystem initialized
[ 0.088242] libata version 3.00 loaded.
[ 0.088488] usbcore: registered new interface driver usbfs
[ 0.088525] usbcore: registered new interface driver hub
[ 0.088615] usbcore: registered new device driver usb
[ 0.089022] ACPI: WMI: Mapper loaded
[ 0.089029] PCI: Using ACPI for IRQ routing
[ 0.089360] NetLabel: Initializing
[ 0.089367] NetLabel: domain hash size = 128
[ 0.089372] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.089414] NetLabel: unlabeled traffic allowed by default
[ 0.089516] Switching to clocksource tsc
[ 0.093714] AppArmor: AppArmor Filesystem Enabled
[ 0.093783] pnp: PnP ACPI init
[ 0.093845] ACPI: bus type pnp registered
[ 0.099564] pnp: PnP ACPI: found 11 devices
[ 0.099574] ACPI: ACPI bus type pnp unregistered
[ 0.099587] PnPBIOS: Disabled by ACPI PNP
[ 0.099626] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.099636] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.099646] system 00:0a: iomem range 0x100000-0x1fefffff could not be
reserved
[ 0.134728] pci 0000:01:08.0: BAR 6: address space collision on of device
[0xff8c0000-0xff8dffff]
[ 0.134742] pci 0000:01:0b.0: BAR 6: address space collision on of device
[0xff8a0000-0xff8bffff]
[ 0.134778] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.134787] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.134800] pci 0000:00:1e.0: MEM window: 0xff800000-0xff8fffff
[ 0.134811] pci 0000:00:1e.0: PREFETCH window: 0xe6a00000-0xf6afffff
[ 0.134841] pci 0000:00:1e.0: setting latency timer to 64
[ 0.134852] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.134860] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.134869] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.134876] pci_bus 0000:01: resource 1 mem: [0xff800000-0xff8fffff]
[ 0.134884] pci_bus 0000:01: resource 2 pref mem [0xe6a00000-0xf6afffff]
[ 0.134892] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.134900] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.135012] NET: Registered protocol family 2
[ 0.135294] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.136138] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.136534] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.136992] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.137003] TCP reno registered
[ 0.137413] NET: Registered protocol family 1
[ 0.137537] pci 0000:01:08.0: Boot video device
[ 0.138120] Scanning for low memory corruption every 60 seconds
[ 0.138622] audit: initializing netlink socket (disabled)
[ 0.138666] type=2000 audit(1372142141.138:1): initialized
[ 0.158272] Trying to unpack rootfs image as initramfs...
[ 0.179375] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.190636] VFS: Disk quotas dquot_6.5.2
[ 0.190943] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.193001] fuse init (API version 7.13)
[ 0.193300] msgmni has been set to 966
[ 0.199176] alg: No test for stdrng (krng)
[ 0.199391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.199400] io scheduler noop registered
[ 0.199406] io scheduler anticipatory registered
[ 0.199412] io scheduler deadline registered
[ 0.199567] io scheduler cfq registered (default)
[ 0.199851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.199917] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.200155] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.200168] ACPI: Power Button [PWRF]
[ 0.204139] isapnp: Scanning for PnP cards...
[ 0.210221] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.210441] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.211250] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.214196] brd: module loaded
[ 0.268582] loop: module loaded
[ 0.268944] input: Macintosh mouse button emulation as
/devices/virtual/input/input1
[ 0.269330] ata_piix 0000:00:1f.1: version 2.13
[ 0.269513] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.269827] scsi0 : ata_piix
[ 0.275216] scsi1 : ata_piix
[ 0.278268] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.278279] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.279538] Fixed MDIO Bus: probed
[ 0.279643] PPP generic driver version 2.4.2
[ 0.279839] tun: Universal TUN/TAP device driver, 1.6
[ 0.279846] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 0.280133] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.280210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.280249] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.280825] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.280834] PCI: setting IRQ 9 as level-triggered
[ 0.280845] uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 9 (level,
low) -> IRQ 9
[ 0.280868] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 0.280877] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 0.281022] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus
number 1
[ 0.281071] uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000ef80
[ 0.281384] usb usb1: configuration #1 chosen from 1 choice
[ 0.281465] hub 1-0:1.0: USB hub found
[ 0.281494] hub 1-0:1.0: 2 ports detected
[ 0.281751] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 0.288598] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.288625] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.289135] mice: PS/2 mouse device common for all mice
[ 0.294811] rtc_cmos 00:02: RTC can wake from S4
[ 0.295058] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.295097] rtc0: alarms up to one month, 114 bytes nvram
[ 0.295466] device-mapper: uevent: version 1.0.3
[ 0.295966] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 0.296187] device-mapper: multipath: version 1.1.0 loaded
[ 0.296197] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.296625] EISA: Probing bus 0 at eisa.0
[ 0.296675] EISA: Detected 0 cards.
[ 0.296684] cpuidle: using governor ladder
[ 0.296691] cpuidle: using governor menu
[ 0.298000] TCP cubic registered
[ 0.298564] NET: Registered protocol family 10
[ 0.299857] lo: Disabled Privacy Extensions
[ 0.300741] NET: Registered protocol family 17
[ 0.300837] Using IPI No-Shortcut mode
[ 0.301146] registered taskstats version 1
[ 0.301480] rtc_cmos 00:02: setting system clock to 2013-06-25 06:35:41 UTC
(1372142141)
[ 0.301490] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.301495] EDD information not available.
[ 0.317974] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 0.467793] ata2.00: ATAPI: TDK CDRW4800B, S7S9, max UDMA/33
[ 0.468017] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 0.468026] ata1.00: 156250000 sectors, multi 16: LBA
[ 0.483742] ata2.00: configured for UDMA/33
[ 0.484136] ata1.00: configured for UDMA/66
[ 0.550147] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 0.898098] isapnp: No Plug & Play device found
[ 0.898213] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 0.898737] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4
PQ: 0 ANSI: 5
[ 0.899244] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.899747] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 0.899899] sd 0:0:0:0: [sda] Write Protect is off
[ 0.899908] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.899984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 0.900436] sda:
[ 0.904644] scsi 1:0:0:0: CD-ROM TDK CDRW4800B S7S9
PQ: 0 ANSI: 5
[ 0.913729] sda1 sda2 < sda5 >
[ 0.933800] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.957752] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 0.957769] Uniform CD-ROM driver Revision: 3.20
[ 0.958216] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.958423] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.328909] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1.471270] Freeing initrd memory: 12835k freed
[ 1.536148] Freeing unused kernel memory: 620k freed
[ 1.539311] Write protecting the kernel text: 4540k
[ 1.539390] Write protecting the kernel read-only data: 1668k
[ 1.614690] udev: starting version 151
[ 1.620233] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1.824272] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2.128148] usb 1-1: new full speed USB device using uhci_hcd and address 7
[ 2.188197] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2.223302] Linux agpgart interface v0.103
[ 2.233770] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[ 2.234101] tulip 0000:01:0b.0: PCI INT A -> Link[LNKD] -> GSI 9 (level,
low) -> IRQ 9
[ 2.234718] tulip0: MII transceiver #1 config 1000 status 7849 advertising
05e1.
[ 2.316239] Floppy drive(s): fd0 is 1.44M
[ 2.318785] eth0: ADMtek Comet rev 17 at Port 0xd400, 00:0c:41:25:79:b8, IRQ
9.
[ 2.334612] [drm] Initialized drm 1.1.0 20060810
[ 2.337069] FDC 0 is a post-1991 82077
[ 2.347362] agpgart-intel 0000:00:00.0: Intel i810 Chipset
[ 2.380697] vga16fb: initializing
[ 2.380719] vga16fb: mapped to 0xc00a0000
[ 2.381213] fb0: VGA16 VGA frame buffer device
[ 2.384374] pci 0000:00:01.0: detected 4MB dedicated video ram
[ 2.395852] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 2.654043] [drm] radeon defaulting to kernel modesetting.
[ 2.654054] [drm] radeon kernel modesetting enabled.
[ 2.654620] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 2.654628] PCI: setting IRQ 11 as level-triggered
[ 2.654639] radeon 0000:01:08.0: PCI INT A -> Link[LNKA] -> GSI 11 (level,
low) -> IRQ 11
[ 2.666242] [drm] radeon: Initializing kernel modesetting.
[ 2.666508] [drm] register mmio base: 0xFF8F0000
[ 2.666514] [drm] register mmio size: 65536
[ 2.667281] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 2.667326] [drm] radeon: VRAM 64M
[ 2.667331] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[ 2.667336] [drm] radeon: GTT 512M
[ 2.667341] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 2.667430] [drm] radeon: irq initialized.
[ 2.667814] [drm] Detected VRAM RAM=64M, BAR=128M
[ 2.667825] [drm] RAM width 32bits DDR
[ 2.668425] [TTM] Zone kernel: Available graphics memory: 254092 kiB.
[ 2.668480] [drm] radeon: 32M of VRAM memory ready
[ 2.668487] [drm] radeon: 512M of GTT memory ready.
[ 2.668540] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.741019] [drm] radeon: cp idle (0x00008080)
[ 2.741150] [drm] Loading R100 Microcode
[ 2.741933] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[ 2.744229] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 2.751782] [drm] radeon: ring at 0x0000000020000000
[ 2.751814] [drm] ring test succeeded in 1 usecs
[ 2.752234] [drm] radeon: ib pool ready.
[ 2.752447] [drm] ib test succeeded in 0 usecs
[ 2.752743] [drm] Default TV standard: PAL
[ 2.752749] [drm] 27.000000000 MHz TV ref clk
[ 2.752753] [drm] No TV DAC info found in BIOS
[ 2.752762] [drm] DFP table revision: 3
[ 2.752885] [drm] Default TV standard: PAL
[ 2.752890] [drm] 27.000000000 MHz TV ref clk
[ 2.752958] [drm] Radeon Display Connectors
[ 2.752963] [drm] Connector 0:
[ 2.752968] [drm] VGA
[ 2.752975] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 2.752980] [drm] Encoders:
[ 2.752985] [drm] CRT1: INTERNAL_DAC1
[ 2.752989] [drm] Connector 1:
[ 2.752993] [drm] DVI-I
[ 2.752997] [drm] HPD1
[ 2.753003] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 2.753008] [drm] Encoders:
[ 2.753012] [drm] CRT2: INTERNAL_DAC2
[ 2.753017] [drm] DFP1: INTERNAL_TMDS1
[ 2.753021] [drm] Connector 2:
[ 2.753025] [drm] S-video
[ 2.753028] [drm] Encoders:
[ 2.753033] [drm] TV1: INTERNAL_DAC2
[ 2.809402] Console: switching to colour frame buffer device 80x30
[ 2.924778] [drm] fb mappable at 0xE8040000
[ 2.924789] [drm] vram apper at 0xE8000000
[ 2.924794] [drm] size 1310720
[ 2.924799] [drm] fb depth is 8
[ 2.924804] [drm] pitch is 1280
[ 2.925290] fb1: radeondrmfb frame buffer device
[ 2.925297] registered panic notifier
[ 2.925313] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:08.0 on
minor 0
[ 3.076131] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3.312312] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3.580252] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3.787528] xor: automatically using best checksumming function: pIII_sse
[ 3.804028] pIII_sse : 2040.000 MB/sec
[ 3.804035] xor: using function: pIII_sse (2040.000 MB/sec)
[ 3.845124] device-mapper: dm-raid45: initialized v0.2594b
[ 3.924108] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 4.093407] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.304217] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 4.552106] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 4.800174] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5.104181] usb 1-1: new full speed USB device using uhci_hcd and address 16
[ 5.164134] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5.544131] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5.792197] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 6.096103] usb 1-1: new full speed USB device using uhci_hcd and address 19
[ 6.156127] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 6.536127] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 6.553966] Adding 1486840k swap on /dev/sda5. Priority:-1 extents:1
across:1486840k
[ 6.784291] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 6.862798] udev: starting version 151
[ 7.032234] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 7.280223] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 7.528223] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 7.832179] usb 1-1: new full speed USB device using uhci_hcd and address 25
[ 7.834183] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 7.892213] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 8.077106] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 8.077319] intel_rng: Firmware space is locked read-only. If you can't or
[ 8.077324] intel_rng: don't want to disable this in firmware setup, and if
[ 8.077327] intel_rng: you are certain that your system has a functional
[ 8.077331] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 8.272242] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 8.282319] dell-wmi: No known WMI GUID found
[ 8.286135] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.326280] psmouse serio1: ID: 10 00 64
[ 8.469626] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.469669] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 8.508138] lp: driver loaded but no devices found
[ 8.565780] lp0: using parport0 (interrupt-driven).
[ 8.576265] usb 1-1: new full speed USB device using uhci_hcd and address 28
[ 8.666666] ppdev: user-space parallel port driver
[ 8.750956] usb 1-1: configuration #1 chosen from 1 choice
[ 9.040226] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input3
[ 9.272120] Initializing USB Mass Storage driver...
[ 9.275944] scsi2 : SCSI emulation for USB Mass Storage devices
[ 9.277092] usbcore: registered new interface driver usb-storage
[ 9.277104] USB Mass Storage support registered.
[ 9.283779] usb-storage: device found at 28
[ 9.283790] usb-storage: waiting for device to settle before scanning
[ 9.690716] type=1505 audit(1372142150.886:2): operation="profile_load"
pid=516 name="/sbin/dhclient3"
[ 9.691926] type=1505 audit(1372142150.886:3): operation="profile_load"
pid=516 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 9.692999] type=1505 audit(1372142150.890:4): operation="profile_replace"
pid=503 name="/sbin/dhclient3"
[ 9.694266] type=1505 audit(1372142150.890:5): operation="profile_replace"
pid=503 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 9.694988] type=1505 audit(1372142150.890:6): operation="profile_load"
pid=503 name="/usr/lib/connman/scripts/dhclient-script"
[ 9.696767] type=1505 audit(1372142150.894:7): operation="profile_replace"
pid=516 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.914864] type=1505 audit(1372142153.110:8): operation="profile_load"
pid=650 name="/usr/share/gdm/guest-session/Xsession"
[ 11.924876] type=1505 audit(1372142153.122:9): operation="profile_replace"
pid=654 name="/sbin/dhclient3"
[ 11.926254] type=1505 audit(1372142153.122:10): operation="profile_replace"
pid=654 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.926983] type=1505 audit(1372142153.122:11): operation="profile_replace"
pid=654 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.281436] usb-storage: device scan complete
[ 14.290474] scsi 2:0:0:0: Direct-Access USB DISK Pro PMAP
PQ: 0 ANSI: 0 CCS
[ 14.298136] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 14.308455] sd 2:0:0:0: [sdb] 15636864 512-byte logical blocks: (8.00
GB/7.45 GiB)
[ 14.311370] sd 2:0:0:0: [sdb] Write Protect is off
[ 14.311389] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 14.311398] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 14.333341] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 14.333367] sdb: sdb1
[ 14.349355] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 14.349379] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 15.385380] vgaarb: device changed decodes:
PCI:0000:01:08.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.385393] vgaarb: transferring owner from PCI:0000:01:08.0 to
PCI:0000:00:01.0
[ 23.180083] eth0: no IPv6 routers present
[ 178.266276] udev: starting version 151
[ 216.183331] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT
AVAILABLE/ENABLED.
[ 244.521060] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT
AVAILABLE/ENABLED.
[ 343.277452] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT
AVAILABLE/ENABLED.
[ 344.114749] __ratelimit: 18 callbacks suppressed
[ 344.114766] halcmd[2670]: segfault at 8 ip 0029b6bc sp bfb95ad0 error 6 in
liblinuxcnchal.so.0[296000+8000]
[ 344.124718] halcmd[2671]: segfault at 8 ip 00e616bc sp bff93ea0 error 6 in
liblinuxcnchal.so.0[e5c000+8000]
[ 344.157513] halcmd[2674]: segfault at 8 ip 004fa6bc sp bfd97750 error 6 in
liblinuxcnchal.so.0[4f5000+8000]
[ 344.402729] halcmd[2678]: segfault at 8 ip 001aa6bc sp bf96efb0 error 6 in
liblinuxcnchal.so.0[1a5000+8000]
[ 344.626732] halcmd[2682]: segfault at 8 ip 00c4d6bc sp bfa44500 error 6 in
liblinuxcnchal.so.0[c48000+8000]
[ 344.852962] halcmd[2686]: segfault at 8 ip 001786bc sp bfc53540 error 6 in
liblinuxcnchal.so.0[173000+8000]
[ 345.078170] halcmd[2690]: segfault at 8 ip 003b56bc sp bf935720 error 6 in
liblinuxcnchal.so.0[3b0000+8000]
[ 345.302802] halcmd[2694]: segfault at 8 ip 0044b6bc sp bfad5d70 error 6 in
liblinuxcnchal.so.0[446000+8000]
[ 345.526783] halcmd[2698]: segfault at 8 ip 00c7d6bc sp bfbe2620 error 6 in
liblinuxcnchal.so.0[c78000+8000]
[ 345.750783] halcmd[2702]: segfault at 8 ip 009b96bc sp bfd94800 error 6 in
liblinuxcnchal.so.0[9b4000+8000]
[ 595.991694] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT
AVAILABLE/ENABLED.
[ 596.716542] __ratelimit: 2 callbacks suppressed
[ 596.716558] halcmd[2836]: segfault at 8 ip 003256bc sp bff185c0 error 6 in
liblinuxcnchal.so.0[320000+8000]
[ 596.726439] halcmd[2837]: segfault at 8 ip 002496bc sp bfe34de0 error 6 in
liblinuxcnchal.so.0[244000+8000]
[ 596.750445] halcmd[2840]: segfault at 8 ip 0032e6bc sp bf9739c0 error 6 in
liblinuxcnchal.so.0[329000+8000]
[ 596.974737] halcmd[2844]: segfault at 8 ip 00e4a6bc sp bfc700e0 error 6 in
liblinuxcnchal.so.0[e45000+8000]
[ 597.198686] halcmd[2848]: segfault at 8 ip 0011c6bc sp bf9a5040 error 6 in
liblinuxcnchal.so.0[117000+8000]
[ 597.422732] halcmd[2852]: segfault at 8 ip 00fba6bc sp bfd5ed00 error 6 in
liblinuxcnchal.so.0[fb5000+8000]
[ 597.646739] halcmd[2856]: segfault at 8 ip 0056c6bc sp bfb9e770 error 6 in
liblinuxcnchal.so.0[567000+8000]
[ 597.873410] halcmd[2860]: segfault at 8 ip 005586bc sp bf888620 error 6 in
liblinuxcnchal.so.0[553000+8000]
[ 598.098125] halcmd[2864]: segfault at 8 ip 003846bc sp bfbafc90 error 6 in
liblinuxcnchal.so.0[37f000+8000]
[ 598.322476] halcmd[2868]: segfault at 8 ip 00ee56bc sp bf956d90 error 6 in
liblinuxcnchal.so.0[ee0000+8000]
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users