On Fri, Jul 26, 2013, at 12:19 PM, Andrew wrote:
> > Is there any way (assuming blcd comp is modified for 90degrees) to use > 3-phase external commutation drive like AMC S60A40 or even 7i39 (just to > test if it works)? Like connect one winding to AB output and other to BC. > Does 7i29 > Is it a three-wire or four-wire connection to the motor? If four-wire, a dual H-bridge is probably the way to go. Something like the 7i40 (7A, 80V) would let you prove out the concept at reduced torque. The 7i29 (22.5A, 165V) would let you get rated continuous power, but no overload. > > Andrew > ------------------------------------------------------------------------------ > See everything from the browser to the database with AppDynamics > Get end-to-end visibility with application monitoring from AppDynamics > Isolate bottlenecks and diagnose root cause in seconds. > Start your free trial of AppDynamics Pro today! > http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users -- John Kasunich [email protected] ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
