2013/7/26 John Kasunich <[email protected]<https://mail.google.com/mail/u/0/?view=cm&fs=1&tf=1&[email protected]> >
> On Fri, Jul 26, 2013, at 12:19 PM, Andrew wrote: > > > Is there any way (assuming blcd comp is modified for 90degrees) to use > > 3-phase external commutation drive like AMC S60A40 or even 7i39 (just to > > test if it works)? Like connect one winding to AB output and other to BC. > > Does 7i29 > > Is it a three-wire or four-wire connection to the motor? If four-wire, > a dual H-bridge is probably the way to go. Something like the 7i40 > (7A, 80V) would let you prove out the concept at reduced torque. > > I forgot to mention - it's 4-wire connection. Actually there are 8 wires but 2 windings for each phase go in series. > The 7i29 (22.5A, 165V) would let you get rated continuous power, > but no overload. > Thanks, that's what I need to know for now. Andrew ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
