I decided to write them all in one post: 1. I am using dev branch because I needed to remap M6 for custom rack tool-change. When I will be able to use stable release version? 2. Where I should find samples mentioned at http://www.linuxcnc.org/docs/html/gui/gladevcp.html#_the_action_mdi_toggle_and_action_mdi_widgets ? 3. How to set component pin, parameter value from gladevcp? 4. How to set component pin, parameter value from G-code? I found syntax for pin like [#<_hal[or2.0.in]>] = 5, as I can remember, but can't find it documented any more. 5. I am lost in LinuxCNC documentation. I have PDFs, links to man and man9 (don't know what "9" means), links to devel and some devel9 docs. And there is man command I can use.. G code manual is divided in some strange way.. And it seems there is no place to find it all. I wish I could fly above them all and see how all the map looks like :) 6. I find minor mistakes in docs sometimes. Would it be wiki - I could correct them, but now I don't know how. Or shouldn't I bother? 7. What are requirements for Machine/Calibration function to work? How to debug why it does not start?
------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
