Am 08.08.2013 um 15:03 schrieb propcoder <[email protected]>:
> I can't find where it is written how to set other components parameter > value.. afaict there is no interface to do that via HAL why dont you use a pin instead of a parameter, and link it to a pin in your Python component - done > > 2013.08.08 14:54, Michael Haberler rašė: >>> 3. How to set component pin, parameter value from gladevcp? >> exactly like in a normal Python HAL component as documented here: >> http://www.linuxcnc.org/docs/html/hal/halmodule.html >> >> for extensions thereof, see the gladevcp manual: >> http://www.linuxcnc.org/docs/html/gui/gladevcp.html , e.g. section 6 >> >> > > > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
