On Sun, 1 Dec 2013, Chris Morley wrote: > Date: Sun, 1 Dec 2013 04:30:07 +0000 > From: Chris Morley <chrisinnana...@hotmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: EMC <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Mesa 5i25 + 7i77 basic configuration > > > >> Date: Sat, 30 Nov 2013 22:35:39 -0200 >> From: leonardomarsagli...@gmail.com >> To: emc-users@lists.sourceforge.net >> Subject: Re: [Emc-users] Mesa 5i25 + 7i77 basic configuration SNIP---------------------------------------------------------------->
> The 5i25 supports hardware steppers but you would need to reflash the 5i25 > for firmware that has stepgens in it. > If you want PWM signals then you don't want the 7i77. Not sure if Peter has > PWM gen firmware for the 5i25 - I'm sure he will answer. > > Chris M With one exception (the resolver interface), all Hostmot2 modules are avalilable on all FPGA cards. Thats is, other than the top level interface (PCI,EPP,SPI,Ethernet,Serial) the firmware is identical for all cards. The 5I25/6I25 configurations tend to use sserial external interfaces to save pins since they only have 17 pins available per connector. There are stepgen and PWM configurations for the 5I25/6I25 (see 7I85SPx2.pin), and almost any combination of available modules is available (with the limit of 34 total pins of course) Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
