Excellent. Tomorrow I'm going to try to move the motor with the VFD and the 7i77.
By the way, the ENA0+ and ENA0- signals turn on/off whenever LinuxCNC asks for the motor to move right? Do I have to link these pins? Or they are already linked because of the firmware installed? Thanks! 2013/12/1 Peter C. Wallace <p...@mesanet.com> > On Sun, 1 Dec 2013, Chris Morley wrote: > > > Date: Sun, 1 Dec 2013 04:30:07 +0000 > > From: Chris Morley <chrisinnana...@hotmail.com> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > To: EMC <emc-users@lists.sourceforge.net> > > Subject: Re: [Emc-users] Mesa 5i25 + 7i77 basic configuration > > > > > > > >> Date: Sat, 30 Nov 2013 22:35:39 -0200 > >> From: leonardomarsagli...@gmail.com > >> To: emc-users@lists.sourceforge.net > >> Subject: Re: [Emc-users] Mesa 5i25 + 7i77 basic configuration > SNIP----------------------------------------------------------------> > > > The 5i25 supports hardware steppers but you would need to reflash the > 5i25 > > for firmware that has stepgens in it. > > If you want PWM signals then you don't want the 7i77. Not sure if Peter > has > > PWM gen firmware for the 5i25 - I'm sure he will answer. > > > > Chris M > > > With one exception (the resolver interface), all Hostmot2 modules are > avalilable on all FPGA cards. Thats is, other than the top level interface > (PCI,EPP,SPI,Ethernet,Serial) the firmware is identical for all cards. The > 5I25/6I25 configurations tend to use sserial external interfaces to save > pins > since they only have 17 pins available per connector. > > There are stepgen and PWM configurations for the 5I25/6I25 (see > 7I85SPx2.pin), > and almost any combination of available modules is available (with the > limit > of 34 total pins of course) > > > Peter Wallace > Mesa Electronics > > > > ------------------------------------------------------------------------------ > Rapidly troubleshoot problems before they affect your business. Most IT > organizations don't have a clear picture of how application performance > affects their revenue. With AppDynamics, you get 100% visibility into your > Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics > Pro! > http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- *Leonardo Marsaglia*. ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
