On Fri, Feb 28, 2014 at 11:41 AM, andy pugh <bodge...@gmail.com> wrote: > I could be persuaded to have some sympathy for this viewpoint, actually. > If G-code simply moved axes in absolute machine space and everything else > was done in the pre-processor then thing would be a great deal simpler.
I'm sitting here writing delta tau g-code. Delta tau apparently takes this view because the provisions for hand writing are horrible, but every program can be really long. Of course, they also don't seem to be able to keep the user interface from crashing, so I have no idea why you would install their software/hardware on anything bigger than a $500 hobby router, but that's an entirely different subject. ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users