Am 08.04.2014 um 10:30 schrieb andy pugh <bodge...@gmail.com>: > On 8 April 2014 06:53, Michael Haberler <mai...@mah.priv.at> wrote: > >> if I add 'stepgen_width=0' to the above line, the TableXPins (eg 026..029 >> above) vanish and become IOPorts? > > No, if you do that then all the stepgen pins will disappear. > The fix is meant to be transparent, existing configs should work > completely unchanged.
ok, removed the stepgen_width param (config is as before) I just cherry-picked your patch http://goo.gl/lMqYDA since onto machinekit: this is what I get: Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt HAL: initializing component 'hm2_pci' Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt RTAPI: initing module HAL_hm2_pci Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt RTAPI: module 'HAL_hm2_pci' loaded, ID: 32774 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt HAL: component 'hm2_pci' initialized, ID = 32774 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt PCI_ID: 10B5:9030 10B5:3131 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt RTAPI_PCI: DeviceID: 10B5 9030 10B5 3131 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt RTAPI_PCI: Calling driver probe function Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt RTAPI_PCI: Enabling Device 0000:05:04.0 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt Resource 0: 0xe9120000 0xe912007f 00040200 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt Resource 1: 0xdc00 0xdc7f 00040101 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt Resource 2: 0xdd00 0xddff 00040101 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt Resource 3: 0xde00 0xdeff 00040101 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt Resource 4: 0xe9100000 0xe910ffff 00040200 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt Resource 5: 0xe9110000 0xe911ffff 00040200 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2_pci: discovered 5i20 at 0000:05:04.0 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt RTAPI_PCI: Map BAR 5 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: parsing config string "firmware=hm2/5i20/SVST2_8.BIT num_encoders=2 num_pwmgens=2 num_stepgens=6" Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: final config: Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: num_encoders=2 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: num_absencs=-1 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: num_resolvers=-1 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: num_pwmgens=2 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: num_3pwmgens=-1 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: sserial_port_0=00000000 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: num_stepgens=6 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: num_bspis=-1 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: num_uarts=-1 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: enable_raw=0 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: firmware=hm2/5i20/SVST2_8.BIT Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: firmware hm2/5i20/SVST2_8.BIT: Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: work.ncd 2010/12/19 11:52:20 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: Part Name: 2s200pq208 Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: FPGA Config: 166980 bytes Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt HAL: creating parameter 'hm2_5i20.0.io_error' Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2: Firmware contains unknown function (gtag-255) Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2/hm2_5i20.0: pin 0 primary tag is 255 ((unknown-gtag-255)), not IOPort! Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2_5i20.0: board fails HM2 registration (not important - just will use another bitfile) - Michael > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment > Start a new project now. Try Jenkins in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
