Andy, Am 08.04.2014 um 01:46 schrieb andy pugh <bodge...@gmail.com>:
> I have pushed what I believe to be a fix for this issue to the 2.6 branch. thanks for this patch! just to make sure I understand this right, since I have this issue: my config line used to read: loadrt hm2_pci config="firmware=hm2/5i20/SVST2_8.BIT num_encoders=2 num_pwmgens=2 num_stepgens=6" the resulting pinout was this: http://static.mah.priv.at/public/pinout.txt if I add 'stepgen_width=0' to the above line, the TableXPins (eg 026..029 above) vanish and become IOPorts? - Michael > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration > Continuously Automate Build, Test & Deployment > Start a new project now. Try Jenkins in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
