2014-05-20 16:44 GMT+03:00 Peter C. Wallace <p...@mesanet.com>: > If you are unable to set any pin low on the 5I24s P3
I created a quick test config, where I set _all_ pins on P2 and P3 as outputs like this: ...gpio.nnn.is-output 1 All outputs were connected to axis.0.amp-enable pin The results (measured on back of 5i24, where the connector lead pins stick out of the board): All pins on P3 change their value. Only gpio.000 changes value on P2, other pins remain at 5V. I tried also ...gpio.nnn.invert-output 1 for all pins. The result is the same - all pins on P3 are inverted (both when true and false, compared to previous test). Only gpio.000 is inverted, all the remaining pins of P2 are at 5V. Viesturs ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
