2014-05-20 18:43 GMT+03:00 Peter C. Wallace <p...@mesanet.com>: > OK I found the issue, the 5I24 manual has the connectors labled wrong > > the correct pinout is: > > P4 I/O 0..23 > P3 I/O 34..47 > P2 I/O 48..71 >
Thanks! Swapped cables (I had 7i37 on P4) and got the machine moving in 3 minutes! Peter, any ideas, what can I do with the other 5i24 that is not found by LinuxCNC on startup? That was the board that was in the box, when I fried the 7i39... Florian, 5i23 manuals are correct, I have used that board in at least 4 machines, never had any issues due to wrong label or mistake in manual. Viesturs ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
