On Tue, 20 May 2014, Florian Rist wrote:

> Date: Tue, 20 May 2014 17:49:03 +0200
> From: Florian Rist <fr...@fs.tum.de>
> Reply-To: "Enhanced Machine Controller (EMC)"
>     <emc-users@lists.sourceforge.net>
> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
> Subject: Re: [Emc-users] 5i24?
> 
> Hi,
> I was just about to suggest it might be caused by wrong labelling
> because I had a similar issue with a 5I23 connected to a 7I42TA.
>
> I don't remember exactly what the problem was, but output and GND pins
> were mixed up some how, or the output pin numbering - I don't remember.
>
> Maybe you can check the 5I23 manual as well.
>
> See you
> Flo
>

Pretty sure the 5I23 manual pinouts are correct (all even pins are grounded on 
all 50 pin I/O FPGA cards)

> ------------------------------------------------------------------------------
> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
> Instantly run your Selenium tests across 300+ browser/OS combos.
> Get unparalleled scalability from the best Selenium testing platform available
> Simple to use. Nothing to install. Get started now for free."
> http://p.sf.net/sfu/SauceLabs
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.


------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to