On Fri, 11 Jul 2014, Gene Heskett wrote: > I can do that without a lot of problems I think. >> >> to read your current configurations pinout >> >> >> Here's the latest mesaflash source: >> >> https://github.com/micges/mesaflash/archive/master.zip > > IOW Peter, I'll have to rip up the current BOB wiring. I was hoping it > was a matter of moving the db25 connector on the rear of the machine.
Probably not, one of the existing pinouts should be close wo what you need (thats a good reason to read the .pin files that come with the 5i25.zip file) If no existing pinout is close enough its easy enough for me to make a custom one (only a few minutes) > > I'll print this, and go get it on that box. gunzip works on that .zip file > I'd assume. > > What I will do is reconfigure my BOB to try & match the 5i25 pin outs. > The .hal files won't match when I move the plug, but I'll see how much > schmardter I can get doing it. > It surely will not match a parallel port hal file the stepgen and PWM numbers can be made to match however > Back later, I promise, unless I get dead or something. > > Thanks Peter. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
