On Friday 11 July 2014 14:45:45 Peter C. Wallace did opine
And Gene did reply:
> On Fri, 11 Jul 2014, Gene Heskett wrote:
> > I can do that without a lot of problems I think.
> > 
> >> to read your current configurations pinout
> >> 
> >> 
> >> Here's the latest mesaflash source:
> >> 
> >> https://github.com/micges/mesaflash/archive/master.zip
> > 
> > IOW Peter, I'll have to rip up the current BOB wiring.  I was hoping
> > it was a matter of moving the db25 connector on the rear of the
> > machine.
> 
> Probably not, one of the existing pinouts should be close wo what you
> need (thats a good reason to read the .pin files that come with the
> 5i25.zip file)
> 
> If no existing pinout is close enough its easy enough for me to make a
> custom one  (only a few minutes)
> 
> > I'll print this, and go get it on that box. gunzip works on that .zip
> > file I'd assume.
> > 
> > What I will do is reconfigure my BOB to try & match the 5i25 pin
> > outs. The .hal files won't match when I move the plug, but I'll see
> > how much schmardter I can get doing it.
> 
> It surely will not match a parallel port hal file
> the stepgen and PWM numbers can be made to match however

I could not select a different pwmgen pin, and no stepgen dir outputs were 
shown when I did select one.  All sorts of BLDC stuffs yes, but not 
stepgens.
 
> > Back later, I promise, unless I get dead or something.
> > 
> > Thanks Peter.
> > 
> > Cheers, Gene Heskett
> > 
> > ---------------------------------------------------------------------
> > --------- _______________________________________________
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
> 
> Peter Wallace
> Mesa Electronics
> 
> (\__/)
> (='.'=) This is Bunny. Copy and paste bunny into your
> (")_(") signature to help him gain world domination.
> 
> 
> -----------------------------------------------------------------------
> ------- _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS

------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to