sorry its fanuc world now and i see it was already discussed On Jul 17, 2014, at 7:13 AM, Dave Cole <linuxcncro...@gmail.com> wrote:
> I know a guy who has two Mazak lathes and they really like them. About > a year ago they both went down so he called Mazak and > both lathe lost some boards.. > > He had over $10,000 in new boards, parts, and labor before he was done. > > Dave > > > > On 7/17/2014 3:45 AM, Leonardo Marsaglia wrote: >> 2014-07-17 1:22 GMT-03:00 Dave Cole <linuxcncro...@gmail.com>: >> >>> I would not bother buying used caps. (Not sure you were) >>> >>> Power electrolytics have a rated life listed in hours and you would be >>> amazed at how few hours some caps are rated. >>> >>> I would only buy new caps or NOS (New old stock) caps. >>> >>> If they have been sitting on a shelf for a long time, like years, some >>> caps have a procedure you are suppose to follow to condition them for >>> use and it can get pretty involved. So new caps are best. >> You're right I'm not buying them old, but only showed the link because it's >> the same capacitor I have. >> >> I found some on Digikey but I'm not sure if they're exactly the same, >> although they are electrolytic capacitors and the ratings are the same so I >> guess that's it. >> >> >> >>> Anything you do with components will be cheap compared to buying new or >>> repaired parts from Fanuc. >> Well, as you said that. I was looking for a solution to my problem on >> CNCzone.com for example, and some people told that from Mazak they wanted >> to charge more than 2000 dolars for repairing the Mitsubishi spindle drive. >> I guess the same happens with Fanuc. Even a guy with a problem in a Mazak, >> said that they would charge you for a list of parameters from and old >> machine. > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck > Code Sight - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
