2014-07-18 12:19 GMT-03:00 Dave Cole <linuxcncro...@gmail.com>:

> Before you buy that new drive I would try and fake out the rest of the
> controls so they don't see the alarm signal and begin to function.
> That way you can buy the new drive knowing that you can get everything
> functional after the swap.
>

Well, today we just finished doing the testing of the signals. Thanks for
the advice off course Dave :)

Turns out, all the inputs and outputs on the T1 work with 24 VDC. We fooled
the CNC and the alarm dissapeared, so now it's functional, with the
exception of the spindle. We tested the command velocity voltage and it's 0
to 10 VDC. There's another pin for direction so it's pretty simple to
replace the original drive.

Fortunately the only delay is going to be the arrival of the VFD because
I'm buying it from a supplier on the US, and I have to wait 3 or 4 days for
it to arrive to Argentina, but anyway so far great news.

The plan of converting the lathe to LinuxCNC is still on the go, because
once we have it turning again we're going to start gathering all the data
and boards necessary to make the conversion. The critical part here is to
define how the DC servo drives work, because the idea is to mantain the
originals, because the are working great.

I'll be telling you how this is going! But as always thank you guys for
being so kind and helpful!



-- 
*Leonardo Marsaglia*.
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to