No evidence, that's what I was told by someone who was helping me troubleshoot the original spindle inop in LinuxCNC but working in PnCConf test issue.
Again I have no explanation as to why I can control the spindle just fine - forward, reverse and any speed I set - in PnCConf but get no spindle movement at all in linuxCNC. Clearly this can't be a hardware issue since the fact that it works properly in the test proves the hardware is ok. The configuration is what was generated by PnCConf and it the spindle has never worked in linuxCNC with that configuration yet it's fine in the test. Thanks, Pete C. ------Original Mail------ From: "John Kasunich" <jmkasun...@fastmail.fm> To: <emc-users@lists.sourceforge.net> Sent: Thu, 18 Sep 2014 17:11:05 -0400 Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help... On Thu, Sep 18, 2014, at 04:56 PM, p...@wpnet.us wrote: > Ok, new information. It seems spindle operation is being disabled due to > complaints about "unexpected real time delay", without any visible notation > in LinuxCNC that anything has been disabled due to an error (poor form). > Maybe things have changed recently, but as far as I know that "unexplained real time delay" message is a warning and doesn't disable anything. What evidence do you have that the delay message is disabling the spindle? -- John Kasunich jmkasun...@fastmail.fm ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users